Alcohol Testers (Detectors) : Hd-Ca-2000

Alcohol Testers (Detectors) : HD-CA-2000

1. Specification :

*Sensor :Highly selective oxide-semiconductor sensor
*Size :120 x 60 x 25 mm
*Weight :200 grams
*Housing :Shock resistant, molded plastic
*Response time :3 sec.
*Warm up time :20 sec.
*Recovery time(sensor purge):30 sec.
*Battery life :Over 300 tests
*Battery :9V alkaline
*External power supply :12V DC adapter
*Accuracy :+- 0.01% at 0.10% BAC
                      +- 0.05mg/liter at 0.50mg/liter BRAC
*Detection range :0.00 ~ 0.40% BAC
                 0.00 ~ 2.00 mg/liter BRAC
*Calibration :BAC simulator (Model 34C/Guth Laboratory, USA)
*Digital display :Three digits in numeric readout
*CE, FCC..

The Personalized Gurdian Against  Drink Driving :

1.Compact, accurate, reliable, smart  looking and easy to use.
2.HD-CA-2000 can be taken everywhere you go to help prevent  
  drink driving and binge drinking.
3.HD-CA-2000 uses same sophisticated oxide-semiconductor sensor as shown
  at right side and its test result is UNAFFECTED by COLA,  COFFEE &
  SMOKING, which are commonly consumed  with alcoholic beverage.

HD-CA-2000 is an unique &  highly-sophisticated alcohol analyzer utilizing
the variation of  electrical property value of the oxide-semiconductor
when the  alcohol substance is detected. And, with the development of
new  ceramic material combined with relevant catalyst, it can selectively
analyze the alcohol concentration to the ppm unit existing in the  human breath.  

Our laboratory made it in developing  the highly-selective semi-conductive
sensor (HD-CA-2000) reactive to  alcohol substance only, which can be
differentiated from the other  semi-conductive sensor products
(which are often affected by the  other substances like smokes and
smells of food). Furthermore,it did  improve to the large extent
the standby,response & recovery time  which could be crucial in
measuring gas  concentration.

How To Use :  

1)Turn on the PWR On/Off  switch
  - Soon after the power on, CA2000 will  start the countdown 200 to 000
    on the display  window.
  - It is a "Warm-up" process to make the  sensor and circuit be ready for testing.

2)When you hear beep sound & green  lighting is on READY, please blow into for 3
  seconds till you  would hear another time of "Beep" sound. 

N.B

  1.In this stage, if you  don't within 30 seconds, it automatically shows OFF display for turn-off
  2.In case you drink  quite a little (if actual concentration would be below
    0.01% BAC/ 0.05mg/L BRAC), it may not be activated. However, it shows    
    still 0.00% and you're said to be in  safe range.

3)Then, after 3.5 seconds, the test  result (BAC or BRAC) will be displayed
  by 3 digits for 15 seconds at  the same time both READY and WARN lamps are flickering.

N.B

  1.If the BAC / BRAC data  would be over 0.05% / 0.25 mg/l(default setting)
    respectively,  red  WARN lamp will  be flickering along with "Alarm" sound. 
  2.The "Alarm" level is  adjustable pursuant to the local legal limit.

4)Finally, it shows "OFF" for  turn-off. 
5)For the successive testing, try  again from No.1 to No.

We are looking for dealer, distributor, importer to represent our products in your state or city.
If you are interested in getting sample and entering into business with this product feel free to contact us without hesitation.